Home > Tools > Marking Tools

Marking Tools

Products

  •  per page
Plumber's Rule
SKU: A131

Dimension-5/8″ x 6 foot
Two sides: Regular scale/45°scale

Our price: $22.75 (€20.02)
Quantity

Small Radius Marker
SKU: F119

Made from Anodized Aluminum
Can hold flat soapstone, round soapstone, and welding pencils
Spring tension joints for constant accuracy and rigidity
Use for 3/4″ to 22″ diameter circles
Can fit in your pocket when folded

Our price: $18.95 (€16.68)
Market price: $24.52 , save 23%
Quantity

Medium Radius Marker
SKU: F120

Made from Anodized Aluminum
Can hold flat soapstone, round soapstone, and welding pencils
Spring tension joints for constant accuracy and rigidity
Use for 3/4″ to 50″ diameter circles
Can fit in your pocket when folded

Our price: $28.56 (€25.13)
Market price: $38.55 , save 26%
Quantity

Master Marker
SKU: F124

Made from Anondized Aluminum
Works on 8″ to 48″ pipe or structural beams
Comes in a protective carrying case
Magnetically attaches to pipe and beams
No Combination Adapters necessary

Our price: $205.00 (€180.40)
Market price: $238.00 , save 14%
Quantity

Multi-Hole Imager w/ On-Off Block
SKU: F135

The Multi-Hole Imager is Flange Wizard® Tools' newest layout tool.
The strong "on and off" magnet makes positioning on a round, flat, or irregular surface easy.
A "bull's eye" circular leveling vial is built in the main tower of the Multi-Hole Imager to assist in leveling the tool as required.
The Multi-Hole Imager will layout round or elongated holes (ellipse) on flat material or pipe to match laterals at compound angles or at 90°.
The main arm is adjustable and notched to keep it centered with the tower for true layouts.
A protractor, with adjustable shaft and sliding marking arm, fits in the main arm of the Imager allowing for layout of elliptical holes in header pipe for matching compound pipe laterals coming in to the header.
It will layout matching holes in pipe for 90° saddle branches.
The Imager is great for round holes in plate or elongated holes when coming in at an angle.

Our price: $230.00 (€202.40)
Market price: $240.00 , save 4%
Quantity

Miter Marker with On Off Block
SKU: F194

The unique design of this tool allows you to telescope out over existing welds to layout angles or change the angles of pipe fittings to meet your special needs.
The marking arm is completely separate from the main body.
It has its own 360 ° rotating shaft with a built-in leveling vial.
The arms have spring-loaded joints for smooth and precision operation for years of trouble-free service.
The size range is 1-1/2 to 18-inch pipe and up to 18-inch structural beams.

Our price: $156.08 (€137.35)
Market price: $196.08 , save 20%
Quantity

Contour Marker Standard
SKU: T101

The Curv-O-Mark Contour Marker is a compact, time-saving tool used to lay out pipe and structural steel joints. Laterals at any angle, tees, wyes, crosses, elbows-any type or size of joint can be quickly and precisely laid out. No more complicated mathematical formulas. No more cut and try. No more needless material waste.#1 Contour Marker Standard

The Contour Marker can be used to lay out pipe from 1-1/2 to 18 in. diameter, or structural steel members up to 18 in. The Contour Marker consists of an X-shaped frame, calibrated protractor, and a triple jointed marking arm and holder. The holder accepts a soapstone crayon (included), felt pen or pencil. The frame easily folds into a compact toolkit. It can be used right side up or upside down, depending on the direction of the line to be scribed The protractor is calibrated on both sides-one in degrees, the other in rise inches-per-foot-to service any type of measurement need. The unit comes with a Structural Adaptor designed to simplify the layout of structural joints, including l-beams, angles, channels, square tubing and similar shapes.

The optional T102 Combination Adaptor Accessory allows the Contour Marker to lay out joints on larger size pipe, as well as scribe compound angles with just one setting. The Contour Marker is made from durable, lightweight aluminum. It requires minimal maintenance, only occasional oiling of the joints, to provide long service life.

Our price: $129.99 (€114.39)
Market price: $160.87 , save 19%
Quantity

Combination Adapter Std.
SKU: T102
The optional Combination Adaptor Accessory allows the Contour Marker to lay out joints on larger size pipe, as well as scribe compound angles with just one setting. The Contour Marker is made from durable, lightweight aluminum. It requires minimal maintenance, only occasional oiling of the joints, to provide long service life.
Our price: $43.57 (€38.34)
Quantity

Contour Marker Jumbo
SKU: T104
A larger version of the Contour Marker, The Jumbo Contour MarkerTM (JCM) has been developed for use in the layout of large diameter pipe, from 8 to 48 inch With its Structural Adapter, the JCM can be used in the layout of extremely large structural steel members up to 48 inch wide. The JCM comes complete with a durable web strap that helps hold the unit in place during layout. A built-in adjustable dial bubble protractor ensures accurate center line location. A soapstone crayon is included. Like the standard model, the JCM's capability can be increased with the Combination Adaptor Accessory.
Our price: $304.99 (€268.39)
Market price: $371.52 , save 18%
Quantity

Combination Adapter Jumbo
SKU: T105
Designed for use with the Standard and Jumbo Contour Markers, the Adaptor simplifies handling and increases layout capacity. The Adaptor permits use of all four sides the Contour Marker and permits marking on small diameter pipe, over nipples, old welds or on wrapped pipe. The Adaptor can also provide layouts with compound angles using a single setting or any degree of take-off on elbows and turns up to 90 degrees. #4 Contour Marker Jumbo
Our price: $78.25 (€68.86)
Quantity

Radius Marker Jumbo
SKU: T114

Models are available in four sizes for scribing circles up to 80-in. diameter.
All are a folding type design-the three smaller models will fit conveniently into a shirt pocket.
All have sturdy friction joints to maintain rigidity and accuracy, and are made from lightweight, rustproof aluminum for long wear.
A soapstone crayon is already installed in each radius marker.

Our price: $52.50 (€46.20)
Market price: $64.15 , save 18%
Quantity

Circle-Ellipse Projector
SKU: T115

Perfect circles, ellipses or oblong circles can now be easily made on any irregular flat or round surface. The Projector features a protractor with sliding rods and an adjustable lever to lock in the specified layout. A strong, 20-pound pull magnetic base holds the Projector in position during layout. A durable web strap (included) holds the unit secure on non magnetic surfaces and can be used on either side of the vertical column. The Projector can also be used to lay out lateral intersections of different diameter pipes, or to project circles from 1-1/2 to 18 in. diameter on flat surfaces intersecting at angles from 0 to 70 degrees from vertical. Attachments to develop larger diameter circles are available. The Projector is equipped with a soapstone crayon and also works with chalk, pencil or steel scribe.

#14 Circle-Ellipse Projector
Our price: $333.99 (€293.91)
Market price: $364.72 , save 8%
Quantity

Trammel Head Set
SKU: T117
Trammel points are the most accurate means of drawing arcs and circles because you can lock the radius tight. You also will save a lot of room in your tool box by taking just the points around since you can use any standard 1/2-in. pipe or conduit that you can find on any job site to create the radius you need. The heads feature radius set points cast in alignment with marking pointers for easy setting. Each is equipped with 1/4-in. screws and squared on the back side for perpendicular alignment. The stationary head holds a 1/4 in. case hardened center point. The moveable head has a 1/8-in. steel scribe hardened to 59 Rockwell.

The chalk holder will accept round, square or flat soapstone crayon, pencil or steel point scribe. Marks from 1-1/2-in. circle to any diameter needed, depending on length of pipe used as a trammel bar. You can attach several lengths of pipe or conduits together to form very large arcs.
Heads are made from durable aluminum. Each set weighs approximately 8 oz. An Allen wrench, soapstone, scribe and pointer are included #19 Multi-Trammel Heads (Set)
Our price: $42.99 (€37.83)
Market price: $45.65 , save 6%
Quantity

Radius Marker Mini
SKU: T118

Marks circles up to 16″
Made from Lightweight Aluminum

Our price: $21.99 (€19.35)
Market price: $26.08 , save 16%
Quantity

Radius Marker Small
SKU: T119

Marks circles up to 40"
Made from Lightweight Aluminum

Our price: $30.99 (€27.27)
Market price: $36.98 , save 16%
Quantity

  •  per page
New special offers are available!