TOC - Pipe Fitters and Pipe Welders Handbook

:

Clear
Clear

Table of Contents:

BASIC TRADE MATHEMATICS

 Methods for Checking Arithmetical Problems

 Method for Checking Multiplication

Method for Checking Addition

Method for Checking Division

Square Root

Extracting Square Root

Solving Right Triangles with Square Root.

The Circle

 Solution of Right Triangles with Trigonometry

Functions of Angles

Finding Set, Run, and Travel

Finding Angles with Trigonometry

Pipe Bends

Simple Bends

Wrinkle Bends

Single Offset Bends

Double Offset Bends

Expansion Bends

Linear Expansion of Piping

 Capacities of Tanks

Rectangular Tanks

Cylindrical Tanks

Figuring the Approximate Capacity of Partly Filled Round Tanks

Elliptical Tanks Spheres

Frustum-Shaped Tanks

Figuring the Capacity of a Coal Bin

Leverage

 Methods of Laying Out Angles

 Laying Out Angles with a Steel Square

 Simplified Method of Laying Out Angles with a Steel Square

 Laying Out Angles with a Two-Foot Rule

 Laying Out Angles with a Six-Foot Rule

 Method of Making a Square Method of Laying Out an Elliptical-Shaped Hole on Steel Plate

 Method of Laying Out Bolt Holes for Flanges

 Method of Laying Out Ring Gaskets

 Figuring Rod Lengths for U Bolts

 PIPE-FITTING CALCULATION

Calculated 45° Offsets

 Simple Offsets Two-Pipe Equal-Spread Offsets

Two-Pipe 22 1/2° Equal-Spread Offset

Two-Pipe 30° Equal-Spread Offset

Two-Pipe 45° Equal-Spread Offset

Two-Pipe 60° Equal-Spread Offset

Pipe Offsets around Obstructions

Starting Point of a 45° Offset around a Square Obstruction

Starting Point of a 45° Offset around a Tank.

Three-Pipe 45° Equal-Spread Offset around a Tank

Two-Pipe 45° Equal-Spread Offset

Three-Pipe Equal-Spread Offset around a Square Obstruction

45° Unequal Spread Offsets

Offsetting Pipe around a Tank in a Corner Using 45° Fittings.

Special Offsets

 Tank Coils

 Rolling Offsets

Finding Travel and Run for a Rolling Offset

Simplified Method of Figuring a Rolling Offset.

PIPE-WELDING LAYOUT

 General

 The Wrap Around

 Division of Pipe Surface into Four Equal Parts Turns

Formula for Angle of Cut

 Laying Out Cut Lines for a Two-Piece 90° Turn

 Laying Out Cut Lines for a Two-Piece 45° Turn

 Laying Out Cut Lines for a Four-Piece 90° Turn

 Determining the Length of Cut Pieces for a Three-Piece 90° Turn

 Determining the Length of Cut Pieces for a Four-Piece 90° Turn

 Determining the Length of Cut Pieces for Special Welded Turns

 Laying Out Cut Lines for Miter Turns on Large Pipe with 16 Divisions Tees

 Tees

Full-Size Tee

Reducing Tee (First Method)

Reducing Tee (Second Method)

Laterals

Full-Size Lateral

Reducing Lateral

True Y

 Reducers

Concentric Reducer

Eccentric Reducer.

Two-Cut Eccentric Reducer

Methods of Blanking Off Pipe

Orange Peel

Bull Plug

Full-Size Cross

Branch Pipe From Back of Welding Elbow

 Welded Offset Formula

 Welded Rolling Offsets

 Angle Iron Brackets

 30° x 60° Angle Iron Brackets

 45° Angle Iron Brackets

 Fabricating Fittings From 90° Welding Elbows

 REFERENCE TABLES

 Standard Cast-Iron Screwed Fittings

Steel Butt-Welding Fittings

Elbows

Tees

Reducing Tees

Reducers

Ring Gaskets for Companion Flanges

 Cast Iron Flanged Fittings

125 Pound Cast Iron Flanged Fittings

250 Pound Cast Iron Flanged Fittings

Standard Companion Flanges and Bolts

 Extra Heavy Companion Flanges and Bolts

 Drill Sizes for Pipe Taps

Tap and Drill Sizes (United States Standard)

Standard Pipe Data

Copper Tube-Type K

Copper Tube-Type L

Copper Tube-Type M

Polyvinyl Chloride Plastic Pipe (PVC) Normal Impact

Polyvinyl Chloride Plastic Pipe (PVC), High Impact

Support Spacing for Polyvinyl Chloride Plastic Pipe (PVC)

Bending Radius for Polyvinyl Chloride Plastic Pipe (PVC)

United States Standard Gauge for Sheet Steel

Useful Information on Various Materials

Boiling Points of Water at Various Pressures

Water Pressure in Pounds With Equivalent Heads

Heads of Water in Feet With Equivalent Pressures

Useful Information

Formulas

Weights and Measures

Multipliers That Are Useful to the Trade

Decimal Equivalents of Fractions of an Inch

Minutes Converted to Decimals of a Degree

Inches Converted to Decimals of Feet

Circumferences and Areas of Circles

Squares, Cubes, and Square and Cube Roots

Trigonometry Table